Weekend 6 of Construction
This weekend doesn’t look like much progress in pictures, but it was a lot of preparation and the hard stuff; we worked on the bathroom bay window/utility closet, and started on the Dutch door retrofitting. Eventually we will cut a round top in the door, and lap end pieces to the cut edges of the Dutch door to make it strong and air/water tight. Sounds really simple but we had a huge debate about how best to do that. All agreed that it will be gorgeous when it is done; in fact it is such a pretty door it was fairly intimidating to make that first cut. The door is solid teak, after all – you’d have to try really hard not to have it look beautiful. Another awesome Craigslist find.
Some of us worked on plumbing/electrical logistics to stay out of the way. To our horror, our RV water inlet had this little sticker on the back (and we even went out of our way to hunt down a mostly metal water inlet instead of a plastic one! It’s a conspiracy…)
We also put together the rafters and raised them, temporarily screwing them down, mostly so we could feel good about our progress on something; next week we will put in blocking and attach hurricane clips (H 2.5’s) to make it really sturdy, and finally sheet the roof and put up fascia board. We decided to make our walls narrower so we could actually have eaves and rain gutters since it rains a heck of a lot more where we are than in Jay Shafer’s part of the world.
It was really good timing on hindsight, as we saw dark clouds coming and decided to tack down the black plastic over the roof in case it rained a little. It usually doesn’t rain a lot, but we didn’t have a good way of covering the floor any more since we had put up criss-crossed supports for squaring and stabilizing the walls in preparation for the roof. We had just gone inside when it POURED for about 20 minutes! We checked afterwards and there was some pooling of water but only where the North-facing windows were, so we tacked up coverings for the windows, too. The doorways will have to stay open until next week. Hopefully it doesn’t rain that hard again for at least a week!
In other news, we picked up some sheets of Magnum Board from a very nice fellow named Jim of EcoAbode, LLC in Tacoma who specializes in green building materials. Evidently he is familiar with Multiple Chemical Sensitivity, and he was very sympathetic to our cause. He’s the closest supplier of magnesium oxide board to Oregon (the next closest is in Northern California), so I will put his info on the Materials List page for those interested.
Also, I talked to a lady in Portland at a place called Brush & Trowel who is a great resource for questions on non-toxic plaster finishes. We are thinking of doing tadelakt for our shower stall instead of the usual galvanized steel or aluminum sheet, and she recommended a system called EcoStucco, which carries a very fine plaster suitable for for it, and the elusive “Savon Noire” recommended for burnishing and waterproofing. Normally I shy away from patented “systems” but in this case, I don’t want to deal with a DIY lime plaster debacle, especially for such small square footage and a short time frame. She said she had tadelakt installed for her shower and loves it, and didn’t see why we couldn’t use it, so long as we keep the whole thing really rigid to prevent cracking. The demo tile she showed us used a stiff cement board backing, followed by what appears to be an entirely superfluous layer of nasty paint, and topped with at most 1/16″ of plaster. Since the Magnum Board is really stiff, I think it would work great if it has solid framing behind it. The Magnum Board is 60 lbs per 4′ x 8′ x 3/8″ (9 mm) sheet, so the plaster won’t add much more weight, and we wouldn’t even use a full sheet. If we like it, we were thinking of doing the floor in Magnum Board with plaster as well, since our house will be a shoe-free area anyway, and the dog hates bathrooms (they are scary places, with BATHs and the site of a very mysterious but offensive habit of pooping in the same place, inside your house – very unhygienic) so no worry of dog nails. And there is certainly no worry of high heels in this household! We have not seen any tiny housers do anything similar, so hopefully there isn’t a very good reason not to – if anyone knows why we shouldn’t, do let us know!